Jackson County Repeater Information

  
       
       
                                     
                                     
                                 

Jackson Michigan  USA
 

Home
           
      

 

      
           
         
          Output Freq. Input Freq. Access Info.

Call

Notes
           
         

51.620

51.120

100 Hz.

WD8PMD

Open Repeater
          144.390 ----- 1200 Baud ----- Local APRS Frequency
           145.510 ----- 1200 Baud ----- Local Packet Frequency
 

 

       145.470 144.870 114.8 Hz. KA8HDY Part of the W8HVG linked repeater system
          145.530 ----- 77 Hz. WD8EEQ Shuttle/ NASA traffic retransmissions
          146.880 146.280 100 Hz. W8JXN CARS Sponsored Repeater
          147.360 147.960 100 Hz. KA8HDY Locally owned repeater
          147.540 ------ 1200 Baud K8SMC DX Packet Node now called AR Node.
          443.175 448.175 77 Hz. WD8EEQ Open Repeater / Remote Base
           444.175 449.175 100 Hz. KA8YRL Open Repeater/ IRLP
 

 

                
           
           
           
              
         

Repeater Control Codes:
          
          88  Codes

36  Codes

  
           PL on 880 Time  39  
            PL off 881 S Meter  55  
          Time 39 Site Temp  56  
          Key pad test   5    
          Autopatch on  *    
          Autopatch off  #  
          DVR test   8*  
          Emergency   *911  
             
         
         
         
       

444.175 Codes   the    IRLP Repeater
       

It is suggested by the control ops that you visit www.irlp.net before using this system.

    
                               
       

Node  4463

    
                               
       

72  - Needs to be pushed first 
 To fully connect in full duplex so the IRLP Decoder can hear your touchtones.

 Now Enter a 4-Digit code   
(Direct Node or Reflector)  From the IRLP Web Site List.  Once the connection has been made...

 71  -Can then be pushed 
( For IRLP Receive Only ).  This allows you to use the repeater locally without going out over the IRLP.

73  -Is the IRLP EXIT Command 
   Which disconnects you from the Node or Reflector you had chosen.

 A user must be in the (72) mode which is (Full Duplex) in order for the IRLP Decoder to respond to your touchtones!
       
       
       
       
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         

Questions or problems regarding this web site should be directed to the Cascades Amateur Radio Society.
Copyright © 2005 Cascades Amateur Radio Society, Jackson MI. All rights reserved.
Last modified: Wednesday November 28, 2007 .